Tube bundles
Discuss exchanger tube material, dimensions and access.
Explore →
Home
/ Pipeline & Piping Surface ECA
Industrial inspection · India & UAE
Pipeline & Piping Surface ECA
A surface array may be considered to examine accessible weld caps, toes and heat-affected zones of conductive piping, and selected surface-breaking crack concerns. The suitability of scanning on coating, curved pipe and irregular weld profiles depends on the probe and reference specimen. ECA is a surface-focused method; buried or volumetric defects need a suitable complementary technique.
Request a proposal Explore servicesTechnical context
Inspection scope, suitable probe design, reference standards and reporting requirements should be determined for the actual asset. Where feasibility is uncertain, send the drawings and inspection objective for review.
Related inspection imagery
- Representative visuals support this page while the original technical wording is preserved.
- Service and application pages now include stronger visual hierarchy for easier browsing.
- Send drawings and project details through the contact page for scope review.
Explore related pages
Surface components
Discuss surface condition, geometry and expected defects.
Explore →Application pages
Carbon steel welds
Surface and near-surface indication planning.
Explore application →
Heat exchanger tubes
Bundle survey and localised tube indications.
Explore application →
Structural surfaces
Plate and accessible detail inspection.
Explore application →
Tube ends
Expansion and support-region concerns.
Explore application →Inspection objective and method choice
Surface cracking and some near-surface indications are potential targets; scan path, curvature and coating lift-off must be demonstrated.
Different techniques may be complementary. The inspection procedure must demonstrate response to the target indication under the actual material and geometry conditions.
Information for a technical proposal
Pipe material, diameter, wall, weld profile, coating, access, expected flaw orientation and inspection code.
Include expected reporting format, outage or shutdown window, site location and applicable procedure or acceptance criteria.
Further reading
- Eddyfi: heat exchanger inspection applications
- Eddyfi: tubing defects and technique selection
- Zetec: surface array applications
These are independent technology references, not evidence of IAIS equipment ownership or project history.
Need a project-specific answer?
Contact IAIS with the component details and required schedule. Inspection capability and commercial terms are confirmed after scope review.
Discuss your inspection